How to Rebuild the Entire Front Suspension in your Car or Truck

  • Joylandi 11 kun oldin

    ChrisFixChrisFix

    Muddati: 23:17

    Learn how to replace the ENTIRE front suspension of your car in this two episode series. First I will show you how to remove the wheel bearing, ball joints, control arms, tie rod, strut, and axle.
    The ball joint and wheel bearing has to be pressed out of the knuckle and I have a bunch of tips and tricks to make that easy. The upper control arm ball joint and tie rod can get stuck in the knuckle so I show some tricks on how to easily remove that. The rest of the suspension parts are pretty simple to remove and replace.
    NEXT EPISODE: uz-films.net/v-video-V_g1-WHD4rw.html
    Tools and Products:
    Mevotech Suspension Parts: amzn.to/2VKrmfr
    Rust Paint: amzn.to/2Dg5yAV
    Impact gun: amzn.to/2It3KIo
    Torque Wrench: amzn.to/2UO2yFY
    Bearing Press: amzn.to/2Gh8tv3
    Ball Joint Puller: amzn.to/2P2wmcH
    Slide Hammer: amzn.to/2URoqAe
    Ball Joint Press: amzn.to/2UTxEvR
    4lb Hammer: amzn.to/2GhZ06A
    Vice: amzn.to/2IfqPyV
    → Become a ChrisFix Subscriber: uz-films.net/us/paintballoo7
    → Instagram: instagram.com/chrisfixit
    → Facebook: facebook.com/chrisfix8
    → Website: www.ChrisFixed.com
    → My Channel Home Page: uz-films.net/us/ChrisFix
    **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.**
    Disclaimer:
    Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

ChrisFix
ChrisFix

Did you guys get notified by YouTube that the video was posted? Also when you watched the video, was there a screen that said "this video was flagged by the YouTube community and may be offensive" or something like that? Just wanted to check because I had issues last night which is why I had to postpone publishing the video. I hope it's all fixed and you guys learn a lot from the video! Stay tuned for the next video and then for a video that, well, covers a life changing event ;) Also for those asking why I am wondering, here is what happened last night when I went to publish: https://www.instagram.com/p/BwI-VOhFkt2/

11 kun oldin
Lurking Shadow
Lurking Shadow

Where did you find the steering and suspension kit I would to do the same for my car

Kun oldin
Its Dudster
Its Dudster

Its fixed

2 kun oldin
UdaMesican
UdaMesican

No I was not notified, glad to see it though this is going to be an upcoming project!

2 kun oldin
Kaitlin Leung
Kaitlin Leung

ChrisFix p

2 kun oldin
slapopimp
slapopimp

+Caleb Peach Simple... repair shops are offended when trade secrets are shared with DIYers that save loads of $$$ not going to their shops!.

3 kun oldin
Josh I.
Josh I.

Can you do a video on leaf springs?

48 daqiqa oldin
Tom Tissier
Tom Tissier

Super boulot même si la barrière de la langue est un peu compliqué 👍

19 soat oldin
Alf
Alf

nice vid dude

Kun oldin
Emilio Arredondo
Emilio Arredondo

So anyone know how to get the rest of that bearing off the hub at 16:10? Or just leave it on there and pretend it was never there?

Kun oldin
Samuel Golden
Samuel Golden

This was incredibly satisfiying

Kun oldin
Robloxian Bigtn12345
Robloxian Bigtn12345

How to replace trunk???? Mine is partly ripped off

Kun oldin
Jürgen Siefert
Jürgen Siefert

great tutorial, was very helpful for me and my honda 👍👍👍

Kun oldin
Devesh Tewary
Devesh Tewary

8:48 the way the rust flies off is smooth...

Kun oldin
Curious Betsy vlogs
Curious Betsy vlogs

Kind of ironic that I’m currently doing this on my skylark with 47 year old original suspension. If you think that’s bad I think half a century old original suspension is just a bit worse lol it was a challenge just to drive it normally

Kun oldin
Doddy Cahyo Putra
Doddy Cahyo Putra

Neat and great work lads! Keep it up 👏

Kun oldin
Mayur jani
Mayur jani

Great Vid informative as always. Just got to say they way iv always been taught when hammering or pushing out bearing \ bushes is to clamps or secure as close as possible to what your trying to remove. allowing the force to go where you want it with risking bending anything. just thought i would put that out there. Keep up the good work, you always keep your content interesting . :)

Kun oldin
Hazshep24
Hazshep24

out with the old ( ͡° ͜ʖ ͡°) AND IN WITH THE NEW (ノಠ ͜ʖ ಠ) ノ

Kun oldin
HK K
HK K

Very detailed and informative video. Great job!

Kun oldin
Nero_Bacura77
Nero_Bacura77

Also you should find a fiero to play with.

Kun oldin
Nero_Bacura77
Nero_Bacura77

Drift car or pro mod goo lol

Kun oldin
Jonathan Gray
Jonathan Gray

I wonder if the haters can do 1/3 of what you can do Chris. A half means they will not. 3/4 means their lazy. Now all the haters can go to hell.

Kun oldin
LIN HAO
LIN HAO

Love your sawing screws to flat heads method.

Kun oldin
FPSKoda4
FPSKoda4

Does anyone wish that chrisfixes videos never end?

2 kun oldin
Fuson Yu
Fuson Yu

Dammmm I love your video to help me to learn those techniques. Thanks

2 kun oldin
Fred Garvin
Fred Garvin

You have 4.8M subs, don't you think you can rent some garage space and work out of the weather?

2 kun oldin
Rodrigo C C
Rodrigo C C

I remember this car when it came out... loving this honda series, and your videos are awsome. Made me want to buy a used truck pick-up and make usable in daily... 🤙🏻👏🏻🙌🏻

2 kun oldin
Christopher Gamer
Christopher Gamer

Chrisfix keep up the amazing good work and i can't wait to see the turbo kit install in the car.

2 kun oldin
ChrisFix
ChrisFix

Thanks a lot

2 kun oldin
Keith Sanders
Keith Sanders

Great video! I am pumped and ready to “fix it like Chris”!

2 kun oldin
ChrisFix
ChrisFix

Awesomeeee

2 kun oldin
OG Bandino
OG Bandino

Chris, would this tutorial still be relatively the same if my car is all wheel steering and all wheel drive? Or would there be too many differences

2 kun oldin
ChrisFix
ChrisFix

Basically the same. Actually since it’s all wheel drive and all wheel steering, the rear will be just like the front too!

2 kun oldin
Xanxツ
Xanxツ

remember to lubricate and penatrate properly

2 kun oldin
carter judkins
carter judkins

I really want to know if that’s actual black paint or something else cause it looks thicker than actual paint

2 kun oldin
Its Dudster
Its Dudster

Wheres the puberty at?

2 kun oldin
decoder55killer
decoder55killer

I nutted :v

2 kun oldin
H gamer lt
H gamer lt

9:08

2 kun oldin
KDM TRAP
KDM TRAP

Who would of thought somebody with marine Biology degree would make car videos

2 kun oldin
Марк Герасимов
Марк Герасимов

Just say that you like to cut rusty screws. Becuase if you are using pozidriv bit to unscrew phillips head you are effin idiot.

2 kun oldin
artdeco101010
artdeco101010

Thanks for posting this, very helpful to see how these should be done.

2 kun oldin
GROUCHY OLD MAN
GROUCHY OLD MAN

Prefer flat black in wheel well

2 kun oldin
Shepherd Wolf
Shepherd Wolf

Oh wow! I forgot about the ChrisFix decal on the valve cover! I need to go back to that video!

2 kun oldin
GROUCHY OLD MAN
GROUCHY OLD MAN

Q: Doesnt spraying off the wheel well introduce water into the trans via the missing axle inlet?

2 kun oldin
GROUCHY OLD MAN
GROUCHY OLD MAN

Stack your spare on top of the tire for better safety backup

2 kun oldin
Steve Huddleston
Steve Huddleston

@ChrisFix Which specific products did you use for the "silver rust paint" and the "thick black paint".

2 kun oldin
po123gsxr
po123gsxr

i was wondering the same thing. the link in the description gives several examples but didn’t seem like it was what he used

8 soat oldin
pipefighter
pipefighter

Nice video mr. !

2 kun oldin
Robert Brumley
Robert Brumley

Instead of going through all that crap, why not just buy a new car? Those old cars aren't worth anything no matter how much money you put into it, you will never get what you put into it.

2 kun oldin
ChrisFix
ChrisFix

I have less than $1k into the car including the price and it’s worth $1500. Plus they don’t make cars like this anymore and it’s a good vehicle to mess around with.

2 kun oldin
Luis Piedra
Luis Piedra

Can you give an estimate at how much it costs to replace the entire suspension with quality parts?

2 kun oldin
Luis Piedra
Luis Piedra

+ChrisFix well mine is a 2000 prelude which Is almost similar but just not sure which brand would be a good quality for that car that's not overpriced

Kun oldin
ChrisFix
ChrisFix

You need to look it up for your specific car. It varies drastically

2 kun oldin
Supremium
Supremium

7:15 me beating my meat

2 kun oldin
alberto escamilla
alberto escamilla

i did not see any notification. great video, i was very excited and you make it seem soo easy

2 kun oldin
shoe112
shoe112

I have a very rusted 2001 nissan maxima, the hood dosnt latch because where the latch part would usually be attached to the frame, there iz now a hole of rust, is it worth saving or should i just start saving up for a newer car

2 kun oldin
Missy Darjan Spasojevic
Missy Darjan Spasojevic

Beautiful video great camera angles! you've came a long way since the older vids you definitely make a great instructive vid. I feel like my autistic son could watch this n do it 👌👏✌

2 kun oldin
Oscar Cabrera
Oscar Cabrera

Awesome video! You always have great content to tackle the job. 🔥

2 kun oldin
Dexter Tang
Dexter Tang

Another reason why those "philips" head screw striped may be due to the fact that they are JIS standard screw head. Similar in design to the common philips head but it inherently is less likely to round off like normal philips does if you use the right JIS screws. Little myth is that all "philips" head screw you see in cars are actually JIS screws. This will save you a lot of headache especially when such screws are used to hold the brake rotors in place.

2 kun oldin
Jesus Lopez
Jesus Lopez

The tire wear isn’t camber wear it’s toe wear. Camber would damage all the tire not just the one side unless your running +18 for that damage. Good video by the way!

2 kun oldin
bravo3
bravo3

Great stuff, and neat tricks......Thanks.

2 kun oldin
Lao Han Tun
Lao Han Tun

You guys open the bearing seal, the nylon seal, will find that, grease is so little, I would rub in real bearing grease, then close with nylon seal. I saw many cases like that.

2 kun oldin
Jorenz Tweet
Jorenz Tweet

Hi Chris. What do you think is the problem in my front suspension when I hear a sort of dribbling sound when passing by uneven road? Sound is not that audible on potholes.

2 kun oldin
MOON SHATER
MOON SHATER

7:15-7:17

2 kun oldin
Midnights & Mornings
Midnights & Mornings

Hey Chris, what school did you go to get your certification?

2 kun oldin
Joseph Fiumara
Joseph Fiumara

Love your videos Chrisfix! Watching your videos I'v learned a lot and saved hundreds of dollars, My neighbors and friends think i'm a mechanic ! hahaa ! Your a great teacher !

2 kun oldin
ghost GAMING
ghost GAMING

VanossGaming is that you 11:03

2 kun oldin
BDF martin
BDF martin

Criss that is a d16 right?

2 kun oldin
bibi
bibi

Pouvez vous mettre les sous-titres en français svp

2 kun oldin
Keyboard Dancers
Keyboard Dancers

Old tech is environmentally friendly, creates jobs and prevents drug use.

2 kun oldin
Nixy Guyaban
Nixy Guyaban

7:06 ChrisFix: You're probably gonna do this a bunch of times. 🤣

2 kun oldin
Greystoke1986
Greystoke1986

Chris, I have enjoyed watching everything that you are doing to the Del Sol!!! What do you have planned for the exterior? Is it a secret or can you reveal a few hints now? Great job Chris!!!

2 kun oldin
Jesse Renn
Jesse Renn

Whoa wait when did he repaint the engine bay? Or was it always that white?

2 kun oldin
Sly John
Sly John

what part of the car are you resting on the jack stands in the beginning?

2 kun oldin
Abdulazeez Jawad
Abdulazeez Jawad

7:05 - when your parents go out for groceries and you're home alone

2 kun oldin
BooMan TheGhost
BooMan TheGhost

7:03 OH YEAH DADDY WORK THE SHAFT!!!

2 kun oldin
KEE LOE
KEE LOE

Great vid. . . . Still dont have the balls to try it myself.

2 kun oldin
Bedlamco
Bedlamco

What is that silver paint

2 kun oldin
JillyBean860
JillyBean860

This brought back awful/great memories of my front suspension rebuild. I did this years ago with the help of your past YouTube videos and everything came out great. You are such an inspiration!

2 kun oldin
jamesws3
jamesws3

What penetrating oil have you found to work best? Reviews are all over the place.

2 kun oldin
TheRustyCracker
TheRustyCracker

Has a cordless impact.... nice tools... but uses a hand saw lol.

2 kun oldin
Chad Bell
Chad Bell

They have a tie rod end remover that makes it much easier to remove the inner tie rod. I would suggest this method over the way ChrisFix does it.

3 kun oldin
Fury_LitBoy
Fury_LitBoy

Why are there even dislikes on this amazing video ❤❤ Love your content

3 kun oldin
Marcelo Esquivel
Marcelo Esquivel

Buy a silverado plzzzzz

3 kun oldin
Jonny DIY
Jonny DIY

May have been answered already but what kind of Paints were those at the end? Silver was? Never seen silver rust proofing paint. Black was Herculiner type paint or?

3 kun oldin
Jonny DIY
Jonny DIY

Por15? 😁

3 kun oldin
Haxmaster
Haxmaster

7:04 Me every night before bed except dealing with another "Hub"

3 kun oldin
decco
decco

chris is obviously a child of god. id have that hub off in 4 pumps

11 soat oldin
Rodolfo killa
Rodolfo killa

Hey Chris we would love a interior deep clean video please. Thanks

3 kun oldin
Bucking Bronco
Bucking Bronco

Now you need to show how to do it with solid axels. Like on an older pickup

3 kun oldin
Bucking Bronco
Bucking Bronco

+ChrisFix how do I message you? I cant find your email?

3 kun oldin
ChrisFix
ChrisFix

Winner Winner Chicken Dinner! Message or email me your name and address for some ChrisFix swag for being the first comment!

3 kun oldin
Matthew Chan
Matthew Chan

Still can’t see the next video. Sigh

3 kun oldin
Jonny Fortin
Jonny Fortin

The 2nd part of this video says its unavailable. was it flagged for being to awesome too? keep up the good work man!

3 kun oldin
nicolas a
nicolas a

Second part????????

3 kun oldin
Jacoboss08
Jacoboss08

What happened to the new video? You said on ig it would be out today.

3 kun oldin
Merrick Galeener
Merrick Galeener

Now just do that three times more

3 kun oldin
Matt Estes
Matt Estes

Do you do a voice over your videos or do you use the microphone on your camera as your doing the work? or do you do both?

3 kun oldin
ANDREW GEORGE
ANDREW GEORGE

Show us how to clean an engine frim old oil and smuge

3 kun oldin
alejandro vargas
alejandro vargas

Vid????

3 kun oldin
David Hommel
David Hommel

Here’s a freebie. Easiest way to loosen the axle nut is to put your socket and breaker bar on before removing the tires and put your car in drive or reverse and only move the car about an inch or two. Way easier on your back.

3 kun oldin
Marco Sin
Marco Sin

Hey Chris, so when you paint the suspension areas are you using some special paint or is it just regular paint?

3 kun oldin
Kingma Jasper
Kingma Jasper

I used to be a fan But now ... I'm just an Air conditioner

3 kun oldin
Joe Lee
Joe Lee

I am very sorry

3 kun oldin
Ash Kumar
Ash Kumar

problem facing in Chevrolet captiva 2007 manual, DTC U0073, U0121 and P0500 ,,,,suddenly odometer stops working ,all needles(Temperature, rpm, speed etc.) showing 0 reading , ac stops cooling while blower keep running,reverse gear light stops working and all happen intermittently and all together. Can anybody suggest solution?

3 kun oldin
Adi Azarov
Adi Azarov

Another incredible video

3 kun oldin
Marc-Antoine
Marc-Antoine

7:02 me when I see a brand new front suspension on a Honda

3 kun oldin
03 Silverado
03 Silverado

Who can help me find a website that can give me good suspension parts for a 2003 silvarado 2x4? THANKS

3 kun oldin
Polo Junior
Polo Junior

What’s the name of the paint you use

3 kun oldin
WhiteStone30
WhiteStone30

Chris: Video next Thursday Next Thursday:....

3 kun oldin
J. M.
J. M.

ChrisFix is posting garbage videos. Honda Civic is not the same as every car. But ChrisFix pretends to know everything and every car. Disgusting.

3 kun oldin
Joe Lee
Joe Lee

youtube is the world of showoff. welcome.

3 kun oldin
Yogesh More
Yogesh More

Hi Chris fix I am looking forward to drifting because I am a pro at it in racing games and I subscribed to your Chanel keep it up🤘🤘

3 kun oldin
Deivid Georgiev
Deivid Georgiev

Make a video with a new throttle body please

3 kun oldin
Alex Martinez
Alex Martinez

Was the paint he used Por-15?

3 kun oldin
CheckDrive
CheckDrive

This is the reason why i subscribe your Channels LOVE YOUR VIDEOS BRO FROM INDIA!! 👍👍👍

3 kun oldin
Eldrich The roblox and Minecraft gamer
Eldrich The roblox and Minecraft gamer

Love your videos

3 kun oldin
LEO SHOWS
LEO SHOWS

You are the reason I just bought a del sol a week ago and I fcking love it ☺️👌🏻 Thanks

3 kun oldin

Keyingisi

Manual Tile Cutter Restoration

19:35

Manual Tile Cutter Restoration

TysyTube Restoration

Ko‘rishlar soni 280 000

Detailed 2JZ Engine Teardown - See Why This Engine is So Loved

12:46

Detailed 2JZ Engine Teardown - See Why This Engine is So Loved

PapadakisRacing

Ko‘rishlar soni 1 200 000

Why Russia is Shrinking Fast

10:38

Why Russia is Shrinking Fast

RealLifeLore

Ko‘rishlar soni 1 188 368

Marvel Studios’ Avengers: Endgame | “Go” TV Spot

0:16

Marvel Studios’ Avengers: Endgame | “Go” TV Spot

Marvel Entertainment

Ko‘rishlar soni 1 270 494

15 MOST POWERFULL ENGINE BY CYLINDER COUNT

12:10

15 MOST POWERFULL ENGINE BY CYLINDER COUNT

MAD LAB

Ko‘rishlar soni 637 000

BMW 7  Full repair. Полный ремонт.

20:02

BMW 7 Full repair. Полный ремонт.

Arthur tussik

Ko‘rishlar soni 7 200 000

Ken Block Tests his NEW Fully Built Ford Raptor in Moab!

16:24

Super Capacitor Rocket

18:56

Super Capacitor Rocket

Tom Stanton

Ko‘rishlar soni 486 000

How to Paint Brake Calipers

07:04

How to Paint Brake Calipers

My Supercar Life

Ko‘rishlar soni 397 000

DIESEL POWER ! TORSI 1000 nm ++  560hp ! TWIN TURBO HILUX

21:24

Surprising my Mom with Her Dream Car!!!

18:31

Surprising my Mom with Her Dream Car!!!

ChrisFix

Ko‘rishlar soni 5 200 000

my phone was stolen at coachella.

15:17

my phone was stolen at coachella.

Ellie Thumann

Ko‘rishlar soni 1 083 198

I PUT MY DURAMAX ON A DYNO! PUTS DOWN INSANE NUMBERS!

14:33

I PUT MY DURAMAX ON A DYNO! PUTS DOWN INSANE NUMBERS!

Braydon Price

Ko‘rishlar soni 205 252

NEW DIFFUSER FOR THE WIDE-BODY CORVETTE!

7:55

NEW DIFFUSER FOR THE WIDE-BODY CORVETTE!

TheSupercarSuspects

Ko‘rishlar soni 93 891

DURAMAX DISCS FIELD OVER 15MPH WITH 22ft DISC AND HARROW

14:24

DURAMAX DISCS FIELD OVER 15MPH WITH 22ft DISC AND HARROW

WhistlinDiesel

Ko‘rishlar soni 496 191

Full Self-Driving

1:57

Full Self-Driving

Tesla

Ko‘rishlar soni 1 615 212

KENTUCKY WOMAN PULLS A GUN WHEN ASKED ABOUT HER 1970 SS454 LS6 CHEVELLE!!!

2:08

KENTUCKY WOMAN PULLS A GUN WHEN ASKED ABOUT HER 1970 SS454 LS6 CHEVELLE!!!

Patrick Glenn Nichols Musclecar Barn Finds

Ko‘rishlar soni 440 831